question

wooram-kim avatar image
0 Likes"
wooram-kim asked wooram-kim commented

Use of FluidConveyor

Hi,

I have problem making my line with fluid Conveyors.

I attached a file. FluidConv.fsm

I wanted build a line like “IntendedLine” in the file. In the line, all materials go into FluidTerminator5. FluidTerminator6 does not receive any material because FluidTerminator5 has enough input capacity.

But in my line (“MyLine), the materials go into not only FluidTerminator8 but also FluidTerminator7. As far as I know, all settings are same except for the shape of conveyors. I don’t know what makes this difference. Please help me.

Thank you.

FlexSim 24.1.0
fluidconveyor
fluidconv.fsm (51.3 KiB)
5 |100000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

1 Answer

Jeanette F avatar image
0 Likes"
Jeanette F answered wooram-kim commented

Hello @WooRam_KIM,

Can you tell me how you created your sloped conveyor? When I create the conveyor it functions how your intend even with the slope.

fluidconv_1.fsm


fluidconv-1.fsm (60.2 KiB)
· 1
5 |100000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

wooram-kim avatar image wooram-kim commented ·

I did not use any special way to create the conveyor. I just placed the conveyor onto a small plane to tilt the conveyor from its starting point. Actually, the problem is that I cannot figure out what my manipulation is causing my conveyor to operate strangely. Therefore, I cannot prevent conveyors from often acting strangely in my model.

0 Likes 0 ·