question

SudheerReddy avatar image
0 Likes"
SudheerReddy asked Joerg Vogel answered

Conveyor Decision Point

As shown in below image, 4 Queues of Type1, Type2, Type3 and Type4 are available and 4 Product Types are travelling on conveyor. When Product Type 1 is reached to DP2 it should be sent to Type 1(Queue) using the operator and in similar way for all Product Types.

I tried achieving this by

Created port connection from Type 1(Queue) to Conveyor and then Sending item to Exit Transfer using DP2 On Arrival Trigger.But logic is not working as intended .Any feed back or input on this.

I'm attaching the model for reference.

conveyor.fsm

FlexSim 20.0.0
conveyor
conveyor.jpg (67.6 KiB)
dp.jpg (32.3 KiB)
dp1.jpg (30.4 KiB)
conveyor.fsm (65.8 KiB)
5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

1 Answer

·
Joerg Vogel avatar image
0 Likes"
Joerg Vogel answered

The DP2 must be in front of Exit Transfer to Queue Type1 and not behind.

5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Write an Answer

Hint: Notify or tag a user in this post by typing @username.

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.