question

Phillip P avatar image
0 Likes"
Phillip P asked Jason Lightfoot commented

Photo Eye "Blocking" State with moving FlowItems

If there is no gap between continuously moving FlowItems, is there a method to reset the time in "blocking" after each items passes even if there is not gap. Basically, I only want the timer for "blocking" state to trigger the "blocked" state when there is no flow and a stopped FlowItem.

FlexSim 22.2.0
photo eyeblockedtimerblocking
5 |100000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

1 Answer

·
Phillip P avatar image
0 Likes"
Phillip P answered Jason Lightfoot commented

I think the "Require Gap to Clear" check box is my answer....if anyone knows if that is wrong, please feel free to correct me.

· 1
5 |100000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Jason Lightfoot avatar image Jason Lightfoot ♦ commented ·
Yes - if you uncheck "require gap to clear" then accumulated flow will be detected even though the PE is not uncovered, alllowing the blocked state to be cleared.
0 Likes 0 ·

Write an Answer

Hint: Notify or tag a user in this post by typing @username.

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.