question

Mathilde DOUSSET avatar image
0 Likes"
Mathilde DOUSSET asked Adrian Haws edited

How to make to load a piece one per one?

Hi!

I explain my problem:

I have one AGV who makes the path between the combiner of rearaxles pallets and the conveyor 5 (the place where the AGV unload the palets). The AGV must also load the pallet of "berceau" (the pink pallets) then unload it on the separator (332,333,334,335). So, there are 4 separators where the AGV must unload the pallet. And the AGV load the 4 separators in the same time .

Now, I would like that the AGV loads one palet on the first separator, then loads one palet of rearaxles and after loads a second pallets on the second separators...

Thank you for your help.

100agv123-berceau-tpsdecycle142.fsm

FlexSim 16.2.0
agv
100agv123-berceau-tpsdecycle142.fsm (13.5 MiB)
5 |100000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

1 Answer

Adrian Haws avatar image
0 Likes"
Adrian Haws answered Adrian Haws edited

Mathilde,

I came up with an option that I think meets the intent of your model. I just made a simple process flow that pulls pallets from a list and alternates between the rearaxles and berceau pallets. It might be a better option to use an AGV process flow, but I'm not as familiar with it. Let me know if I misunderstood your question or if this brings up other issues.


3774-100agv123-berceau-tpsdecycle142-2.fsm (13.5 MiB)
5 |100000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.