question

Ignacio H2 avatar image
0 Likes"
Ignacio H2 asked Jason Lightfoot commented

Transportar flowitems apilados en un conveyor

¡Hola! Mi situación es la siguiente.

Necesito que en las cintas de transporte (conveyor) viajes los flowitems (cajas, etc) de manera apilada, y no una atrás de la otra. Ejemplo: que 12 cajas apiladas viajes a través de la cinta de transporte y detrás de esas viajen otras 12 más (apiladas)


"Hello! My situation is the next. I need the flowitems (boxes, etc.) to travel on the conveyor belts in a stacked manner, and not one after the other. Example: that 12 stacked boxes travel through the conveyor belt and behind those travel another 12 more (stacked)"

conveyorsitemflowseparate conveying
5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Joerg Vogel avatar image
0 Likes"
Joerg Vogel answered

Queue: activate batching

Robot: max capacity > 12

EntryTransfer: Max. Transports in > 12

photo eye on distance 0 = on Block no Space needed: Store Reference of previous entered item AND change location to Look like being stacked to previous item. Reset label, if batch is complete.

5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Kavika F avatar image
0 Likes"
Kavika F answered Jason Lightfoot commented

Hey @Ignacio H2, this is a simple model that may do what you're describing. A combiner stacks boxes onto a pallet and then rolls it down a conveyor belt into a sink. Does this help?

Stack Boxes on Conveyor.fsm


· 2
5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Muchas gracias, me es de ayuda parcial pero estaría necesitando lo siguiente:

El robot almacena cajas en un Queque (apila 12). El robot lleva esas 12 cajas a una cinta (tampoco puedo lograr que cargue las 12 juntas, lo hace de a una y eso no es lo que necesito). El problema es que esas 12 cajas se transportan una atrás de la otra, y necesito que se transporten apiladas.

Combinarlas no me ayuda demasiado ya que después de esas cajas apiladas se leen en flexsim como un solo objeto, y necesito que se interpreten como unidades separadas ya que después debo combinar 2 de esas cajas con un palet.

Adjunto modelo representativo.

12 cajas transportadas.fsm

"Thank you very much, it is of partial help to me but I would be needing the following: The robot stores boxes in a Cake (stacks 12). The robot takes those 12 boxes to a belt (I can't get it to load all 12 together either, it does it one at a time and that's not what I need). The problem is that those 12 boxes are transported one after the other, and I need them to be transported stacked. Combining them doesn't help me too much since after those stacked boxes they are read in flexsim as a single object, and I need them to be interpreted as separate units since then I have to combine 2 of those boxes with a pallet. Representative model attached."

0 Likes 0 ·

It sounds like you may want this. Just use a combiner before the conveyor, not a queue - and change the flowitem to one that uses a packing method (container).

1652705023753.png

12-cajas-transportadas_jl.fsm

0 Likes 0 ·

Write an Answer

Hint: Notify or tag a user in this post by typing @username.

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.