question

Victor Alejandro HT avatar image
0 Likes"
Victor Alejandro HT asked Joshua S converted comment to answer

Operator returning to a home location with PF

Hello all,

I made a logic in PF and it works the way I need but when the crane and the operator has no more boxes to move I need them both to come back to a queue. I know that with a trigger in the task executers I can send them to a location on resource available but I need to do it with PF to avoid altering my logic and results. I attached the model.

Thanks for your support.

crane-y-operador1.fsm

FlexSim 18.2.0
process flowcrane movement
5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Victor Alejandro HT avatar image
0 Likes"
Victor Alejandro HT answered

Thank you @gilbert jerald it was not the exact behaviour that I wanted, but your logic made me adjust mine and it worked out. I attached the model, once again thanks.

crane-and-operator.fsm


5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

gilbert jerald avatar image
0 Likes"
gilbert jerald answered Joshua S converted comment to answer

@ Victor Alejandro HT

Hi,

I have attached a sample model where both crane and the operator will move to queue9 when there is no item to be load in queue1. when the item arrives in queue1 the crane and the operator will return to queue1 to do their regular activity.

If the model does not satisfied your question let me know.

support-crane.fsm

Thanks


support-crane.fsm (51.7 KiB)
5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Write an Answer

Hint: Notify or tag a user in this post by typing @username.

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.