question

Liam Chiu avatar image
0 Likes"
Liam Chiu asked Jason Lightfoot edited

How to set up downtime for maintenance?

Hello

I'm trying to set up downtime for maintenance, when 5 defective products are detected continuously, cutting machine shutdown for maintenance. (Five consecutive defective products can include length, outer diameter and width) I don't know how to set it. I have attached a model of what I have.

Thank you in advance. :)


FlexSim 20.1.3
maintenancepartsdefectiveshutdown
inspection-station4.zip (148.1 KiB)
5 |100000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

1 Answer

·
Jason Lightfoot avatar image
0 Likes"
Jason Lightfoot answered Jason Lightfoot edited

You first define somewhere the limits for acceptance on each of the characteristics (length, diameter, width)

When the item is finished increment a label if the item is outside of the limits.

When the label reaches 5, stop the machine for a period and reset the count to zero.

When you have this in your model and have removed the exceptions post again if you're having any trouble with implementing that logic.

· 2
5 |100000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Liam Chiu avatar image Liam Chiu commented ·

Hi @Jason Lightfoot

I had set limits and labels, but I don't know how to make the rule when defects appear continuity. Your suggested way is to accumulate the defects.

Thanks for your comments :)

0 Likes 0 ·
Jason Lightfoot avatar image Jason Lightfoot ♦ Liam Chiu commented ·

.

0 Likes 0 ·

Write an Answer

Hint: Notify or tag a user in this post by typing @username.

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.