question

Ryusuke T avatar image
0 Likes"
Ryusuke T asked Jason Lightfoot edited

Error due to path movement

Hi,

Please check the attached file.

When I run this model it works fine.

However, if the entire object is selected and the object is moved, the cross point that is the intersection point will not be followed.

2023092601.png

If you run the simulation in this state, a navigation error will occur. The vertical paths are connected in a split state, and this seems to be the cause.

Please check it.

Error due to path movement.fsm

FlexSim 23.0.11
agv pathsmove objects
2023092601.png (79.1 KiB)
error-due-to-path-movement.fsm (33.1 KiB)
5 |100000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

1 Answer

·
Jason Lightfoot avatar image
0 Likes"
Jason Lightfoot answered Jason Lightfoot edited

Thank you for pointing this out.

Refreshing the path links of the entire network fixes the intersection, but not the TE's control point's location on the path. I'll send this into the dev team.

5 |100000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Write an Answer

Hint: Notify or tag a user in this post by typing @username.

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.