Hello,
I would like to separate a pallet by an percentage (like 75% and 25%) in 2 different queue.
I mean, one queue will have 25% of the pallet and the other 75%.
Any help will be appreciate.
I'm new on the Flexsim!
Thank you
Hello,
I would like to separate a pallet by an percentage (like 75% and 25%) in 2 different queue.
I mean, one queue will have 25% of the pallet and the other 75%.
Any help will be appreciate.
I'm new on the Flexsim!
Thank you
Fixed ratio with output port 1 connected to an object to receive pallets:
if(current.countSplit > 4) current.countSplit = 1;// still if port > 1
return contentport;
if(current.countSplit == 4) return 3;
Hello Jörg,
I'm not able to open your file, is't normal?
Thank you
Mike
You have updated the conditions in a comment to Braydn. So I edited my answer to enhance the model to unpack items with a fixed ratio.
Ha ok I understand,
But I was not able to open your file before my comments to Braydn
Thank you for your help!
@Michael D4 A separator is used for separating parts from a whole. If you have not, I would recommend going through the tutorials, as tasks like this are covered there. I used the flow tab of the processor to define the percentages. Percentages.fsm
Hello @Braydn T,
Thank you for your reply
I have watched many tutorials but unfortunately no one has covered this topic with the %.
What I tried to do was, if I have a pallet containing as many boxes, I would like 25% of my entire pallet to be for my store and the remaining 75% for my assembly line. And the number of boxes per pallet can change.
In fact, in your model (percentages.fsm) , when I start running, the first pallet goes straight to the store (like 1) but what I want is 0.25 from my pallet.
Can Flexsim do this for a pallet?
Also @Braydn, I'm not sure to understand the purpose of the separator instead of Processor. Why do you use Processor instead of Separator, we should be able to use Separator with the %? Thank you for your help
14 People are following this question.
© 1993- FlexSim Software Products, Inc. All Rights Reserved.
FlexSim is a fully 3D simulation software environment. FlexSim can be used to simulate any process in any industry.
FlexSim®, FlexSim Healthcare™, Problem Solved.®, the FlexSim logo, the FlexSim X-mark, and the FlexSim Healthcare logo with stylized Caduceus mark are trademarks of FlexSim Software Products, Inc. All rights reserved.