question

Meng,Li avatar image
0 Likes"
Meng,Li asked Andrew O commented

Conditional Rule not work on One-Way divider?

It seems that conditional rule is unavailable on One-Way divider. Is there a way to set conditional rule for One-Way divider?

FlexSim 22.2.0
astardividerconditional rule
· 2
5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Jacob W2 avatar image Jacob W2 ♦ commented ·

Hi @Meng,Li,

It's hard to know how to help without looking at your model. To receive a more accurate solution, please post your model or a sample model that demonstrates your question.

You can upload your models or other files by appending ".jpg" to the filename. Files ending in .jpg are not effected by the bug. You can also upload your model and other files to FlexSim's file share site. Include the file name in your question so that we know which upload to reference.

Proprietary models can be posted as a private question visible only to FlexSim U.S. support staff. You can also contact your local FlexSim distributor for phone or email help.

0 Likes 0 ·
Andrew O avatar image Andrew O ♦ commented ·

Hi @Meng,Li, was Kavika F's answer helpful? If so, please click the "Accept" button at the bottom of their answer. Or if you still have questions, add a comment and we'll continue the conversation.

If we haven't heard back from you within 3 business days we'll auto-accept an answer, but you can always unaccept and comment back to reopen your question.

0 Likes 0 ·

1 Answer

·
Kavika F avatar image
0 Likes"
Kavika F answered Matthew Gillespie edited

Hey @Meng,Li, when you click on a Divider, in the Properties panel, click on the Edit Button like so.

1663098371098.png

A window will pop up like this.

1663098401914.png

Here you can add your rules. Once you've added your rule, hit Apply and Ok. Then reset your model. The rule should appear in the dropdown for the divider.

1663098458017.png


1663098371098.png (3.9 KiB)
1663098401914.png (14.1 KiB)
1663098458017.png (2.9 KiB)
· 7
5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Meng,Li avatar image Meng,Li commented ·

Yes, what you said is about how to set conditional rule and use it. My point is that conditional rule not work on One-Way divider.Thank you all the same.

0 Likes 0 ·
Kavika F avatar image Kavika F ♦ Meng,Li commented ·
Is your Task Executer connected to the AStar network? If it is not, then it will ignore dividers and barriers.
0 Likes 0 ·
Matthew Gillespie avatar image Matthew Gillespie ♦♦ Meng,Li commented ·

@Meng,Li Conditional Rules do work with one way dividers. Here's an example with a conditional rule of traveler.Type == 1. The first person is Type 1 and so has to walk around the divider when going to the processor. The second person is Type 2 and can walk through the divider both ways.

divider.gif

0 Likes 0 ·
divider.gif (289.1 KiB)
Meng,Li avatar image Meng,Li Matthew Gillespie ♦♦ commented ·

In your model, the direction of the divider is from Processor1 to Queue1. Then i need to set conditional rule for preventing the first person from passing the divider after working at processor1.(For example, there is a supermarket entrance which can only allow healthy people enter, and exit is somewhere else)

0 Likes 0 ·
Show more comments

Write an Answer

Hint: Notify or tag a user in this post by typing @username.

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.