question

sau_fui.e avatar image
0 Likes"
sau_fui.e asked Felix Möhlmann answered

Setup time using global table

I am making a global table so that it will be easier for other users to change process and setup time for my processor, I have gotten the processor process time to work but am unable to do the same for Setup-time (Output per hour is vastly different in experimenter, for process time it stayed the same as when I used values by case)

1670909041127.png

1670909116851.png

I have also tried using the same global table as with process time but that also does not work

1670909217945.png

1670909226603.png

My process time is set-up as such:

1670909255571.png

AutoType1.fsm

FlexSim 16.0.9
global tableprocessor setup
1670909041127.png (6.6 KiB)
1670909116851.png (5.4 KiB)
1670909217945.png (4.8 KiB)
1670909226603.png (11.9 KiB)
1670909255571.png (5.0 KiB)
autotype1.fsm (2.9 MiB)
5 |100000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

1 Answer

Felix Möhlmann avatar image
1 Like"
Felix Möhlmann answered

The cell in GlobalTable2 is formatted as string (text) data (cell content aligned to the left). Change it to number data and it should work.

Your second solution should work, but you only use this on processor5 in the attached model, so experimenter results would still be different.

5 |100000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.