question

amandaprado avatar image
0 Likes"
amandaprado asked Jeanette F commented

Change line configuration from GUI

Hey guys,

I would like to know if it is possible to create the following situation from a GUI:

Where I work there are 4 production lines. Two of them are dedicated and are always configured the same way, but two of them are hybrid.

Lines that are hybrid run two different products, with different processes.

I'm doing a study on the amount of AMR, so I need to evaluate all the scenarios and I thought about making this change in the hybrid lines scenario using a GUI.

I don't know if I was able to be clear, but if possible, could someone guide me?

Thank you very much

FlexSim 24.0.1
custom gui
· 1
5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Vothan Salomão avatar image
0 Likes"
Vothan Salomão answered Yumi Nishijima commented

Hello @AmandaPrado , how are you? Can you follow this video tutorial uploaded by FlexSim Brazil on how to set up the GUI
https://www.youtube.com/watch?v=Z0AQ9UuDWwc

5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Yumi Nishijima avatar image
0 Likes"
Yumi Nishijima answered

To change the type of product produced on the lines, you need to link the information from the 'Source_Config' table with the object. I configured a new GUI changing:

  1. Add the coldlink in the GUI
  2. Add the button and insert the apply command
  3. In the object 'Linha_1A', configure the inter-arrival time

Steps 1 and 2 of the GUI are explained in the link https://www.youtube.com/watch?v=jPPhXE3RA5A

forum-flexsim_solved.fsm


5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

amandaprado avatar image
0 Likes"
amandaprado answered

Could someone teach me how I can configure my GUIs?

I would like to do the following: when clicking on the source, the user can select which product will run on that particular line. I made a config in the Global Table with the product rate.

Forum Flexsim.fsm


forum-flexsim.fsm (5.6 MiB)
5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.