How do I set AGV speed in my simulation?

Question

question

fiz asked Jul 31, '24 Jason Lightfoot commented Jul 31, '24

How do I set AGV speed in my simulation?

Hi help needed! I tried changing the speed in my Simulation but not able to do so?

Sim Model

Software Version:

FlexSim 21.0.10

agv speed

1722408769273.png (79.8 KiB)

1722408802566.png (77.1 KiB)

5 |100000

Attachments: Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Answer 1 · 2024-07-31T09:01:10Z

Jason Lightfoot answered Jul 31, '24 fiz commented Aug 1, '24

For AGVs you set the speed parameters in the AGV Network properties based on path class, agvtype and loadtype - shown in your first image. The AGVs properties are therefore greyed as they are not used in this case.

· 4

5 |100000

Attachments: Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

fiz commented · Jul 31 at 09:03 AM

for this method is there a guide in flexsim or a simple simulation that i could try and follow as i tried changing the parameters in the first pictiure but the speed still do not change.

0 ·

Jason Lightfoot ♦♦ fiz commented · Jul 31 at 09:32 AM

Make sure you apply the changes. Create a small test model and upload that if you can't get it to work.

0 ·

fiz Jason Lightfoot ♦♦ commented · Jul 31 at 10:30 AM

Okay will do thank you, by the way it may not have work due to misunderstanding of the units used, what is the units used for the first picture and how may i know it?

0 ·

Show more comments

question