question

Kamil P avatar image
0 Likes"
Kamil P asked Joshua S commented

How do I change load time ?

I have a problem i would like to change a load time between queue to process. For example from queue to process, I use one operator.

Second question is how to change the number of operators about flow e.g. queue in my project i have one operator in flow , how change this?

FlexSim 17.1.6
change in process
· 2
5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Jeff Nordgren avatar image Jeff Nordgren commented ·
@Kamil P

If you could send in your model or a sample model of the problem area, that would help a lot. It's hard to answer your question when we don't have a model to look at to see what is happening.

Thanks.

0 Likes 0 ·
Kamil P avatar image Kamil P Jeff Nordgren commented ·

I have problem with load time. Situation looks like this, I have first load time in operator between source to processor one on 12 seconds. And i don't know how i change next load time between processor 1 to processor 2

trial-model.fsm

0 Likes 0 ·
trial-model.fsm (18.5 KiB)

1 Answer

·
Joshua S avatar image
1 Like"
Joshua S answered Joshua S commented

You can change load and unload times in the operator properties as shown in the picture below.

Can you give a little more detail by what you mean in your second question?


pic1.png (23.2 KiB)
· 4
5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Joshua S avatar image Joshua S ♦ commented ·

@Kamil P

Here's a way to set different load times based of which processor it is going to. For the source and 2 of the processors, I had a label set and changed called "Processor". Then I had the operators load time be based off of the current items "Processor" label value. you can change those.

0 Likes 0 ·
pic1.png (30.8 KiB)
pic2.png (24.7 KiB)
Kamil P avatar image Kamil P Joshua S ♦ commented ·

trial-model.fsmOk i changed this modedl , but i have a problem because it showed me information that "Label does not exist." this is a file. Can you see this file ?

0 Likes 0 ·
trial-model.fsm (152.5 KiB)
Kamil P avatar image Kamil P commented ·

ok i mean road between source one to processor 1, I would like to set road up between source1 to processor 2 on e.g. 20 seconds , i use one dispatcher and one operator. i add file with my work

trial-model-flexi.fsm

0 Likes 0 ·
flex-sim.png (236.1 KiB)
Joshua S avatar image Joshua S ♦ Kamil P commented ·

@Kamil P

I must have changed something last minute, change the assign label to "OnCreation" rather then "OnExit" on the source.

0 Likes 0 ·
pic1.png (18.1 KiB)

Write an Answer

Hint: Notify or tag a user in this post by typing @username.

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.