question

Estephe DLDL avatar image
0 Likes"
Estephe DLDL asked Matthew Gillespie answered

Patient not continuing the path

Hello,

With the model attached, I have a problem, when i reach day 2 of the simulation, I have a patient that is supposed to arrive at 16:00, he has to be taken by MD30 (schedule : Chiru2MeJV) which is available and has to go in OR5. But this does not happen and I don't know why, he will be taken in charge at 8 during the third day by another MD. What is the problem ? Normally I have said that the day is over when there is no patient in the model but it does not work for that specific case.

Thanks by advance.

modele-memoire-sem1.fsm

Choose One
FlexSim HC 5.3.6
patient track
modele-memoire-sem1.fsm (940.2 KiB)
modele-memoire-sem1.fsm (940.2 KiB)
5 |100000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

1 Answer

Matthew Gillespie avatar image
1 Like"
Matthew Gillespie answered

All the ORs (including OR5) are scheduled to close at 16:00, however Patient 34 doesn't finish their operation in OR5 until 16:17. So by the time Patient 34 is done with OR5, that bed is closed and Patient 37 can't get it. If I change the Shift Schedule so that the ORs don't close until 16:30 Patient 37 successfully gets OR5.

5 |100000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.