question

Robert F2 avatar image
0 Likes"
Robert F2 asked Robert F2 commented

Can't display robot throughput per hour

I would like to create a graph in Dashboard2 that displays the robot throughput per hour but when I run the simulation, no data is displayed. My other graphs (processor throughput per hour and robot output over time) each display the data as I want, but the robot throughput will not display.

Any tips are appreciated.

frxfileserv1dncpersonal-foldersrobert-flatteryd126.fsm

Choose One
robot throughput
frxfileserv1dncpersonal-foldersrobert-flatteryd126.fsm (75.3 KiB)
5 |100000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

1 Answer

·
zacharyh avatar image
0 Likes"
zacharyh answered

@Robert F2

I believe I may have fixed it. To see how I got it fixed please look at this tutorial linked, specifically step 4.

https://docs.flexsim.com/en/19.1/Tutorials/FlexSimBasics/1-2GetData/

Also I am not sure if your robot is supposed to be moving the items from the conveyor to the processor. If so double click on the Exit Transfer point (White box) at the end of the conveyor and select the box next to Use transport, and then create an 'S' connect between the Exit Transfer point to the robot.

frxfileserv1dncpersonal-foldersrobert-flatteryd126.fsm


frxfileserv1dncpersonal-foldersrobert-flatteryd126.fsm (76.1 KiB)
5 |100000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Write an Answer

Hint: Notify or tag a user in this post by typing @username.

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.