question

Kyuyoung Kim avatar image
0 Likes"
Kyuyoung Kim asked Kyuyoung Kim commented

Create model of 'Vertical conveyor belt with carriage unit'

Hi all,
I am trying to create vertical conveyor model to simluate my facility and the video I took with 5 boxes.
Wish to realize the features of

Feature 1) create vertical conveyor (with 4 carriage unit, of vertical speed 0.3m/s)

Feature 2) manually set up total number of source input as 5 (I took a video with only 5 boxes), so the simulation animation is gotta match to my video taken.
1) https://www.youtube.com/watch?v=KtBKrpK-cZ0 : approaching to vertical (at 1F)
2) https://www.youtube.com/watch?v=Ch96h6byuxQ : landing out from vertical (at 2F)

Can someone help?

210310_[GST] set up vertical conveyor from 1F to 2F.fsm

FlexSim 21.0.2
conveyorflexsim 21.0.2source control
1615391644335.png (254.3 KiB)
210310-gst-set-up-vertical-conveyor-from-1f-to-2f.fsm (56.5 KiB)
· 1
5 |100000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Jason Lightfoot avatar image Jason Lightfoot ♦ commented ·

You asked this question in another post already.

0 Likes 0 ·

1 Answer

·
Jason Lightfoot avatar image
0 Likes"
Jason Lightfoot answered Kyuyoung Kim commented

You need a fixed interval movement (power and free) and you need to connect the conveyors.

210310-gst-set-up-vertical-conveyor-from-1f-to-2f_jl.fsm


210310-gst-set-up-vertical-conveyor-from-1f-to-2f.fsm (56.7 KiB)
· 9
5 |100000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Jason Lightfoot avatar image Jason Lightfoot ♦ commented ·

Click on the entry transfer:

Change the entry orientation:

210310-gst-set-up-vertical-conveyor-from-1f-to-2f_jl2.fsm


1 Like 1 ·
1615464943866.png (23.3 KiB)
1615464964412.png (3.4 KiB)
210310-gst-set-up-vertical-conveyor-from-1f-to-2f.fsm (56.8 KiB)
Kyuyoung Kim avatar image Kyuyoung Kim Jason Lightfoot ♦ commented ·

Hi,

Thanks to fl-up on this, Jason.

Tried the file you just uploaded, but the simulation running stops at exact 51.05 secs. (as below capture)

Is if fine working at your side without simulation stopping?

0 Likes 0 ·
1615467470892.png (83.0 KiB)
Jason Lightfoot avatar image Jason Lightfoot ♦ Kyuyoung Kim commented ·

Yes it runs fine fore me. I'm using 21.0.3 - you could try that.

0 Likes 0 ·
Show more comments
Kyuyoung Kim avatar image Kyuyoung Kim commented ·

Hi Jason,
from my model, standing one(just edited z-coordinate of the horizontal belt) was just to show what I want to create.

What I am trying to simulate shall be like below (carriage unit carries the boxes - without rotating box, saying box is containing water and stuff)

0 Likes 0 ·
1615429706269.png (341.4 KiB)
1615429725238.png (374.0 KiB)
1615429754953.png (357.3 KiB)
1615429798305.png (302.1 KiB)

Write an Answer

Hint: Notify or tag a user in this post by typing @username.

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.