Change output value in dashboard

Question

question

Arvind J asked Jan 12, '22 Ryan Clark commented Jan 19, '22

Change output value in dashboard

Hi, need your advice.

How to multiply/change output value in dashboard as shown in the picture below.

All these value (92, 66, 52, 61, 54, 55) must multiply with 10 x 20 .

eg;

92 x 10 x 20 = 18400

66 x 10 x 20 = 13200

I want this 18400 shown in the dashboard below instead of 92.

TIM DISPENSE.fsm

Software Version:

FlexSim 21.1.4

dashboards processtime dashboard data change

microsoftteams-image.png (53.8 KiB)

tim-dispense.fsm (75.6 KiB)

· 2

5 |100000

Attachments: Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Joerg Vogel commented · Jan 12, 2022 at 07:13 AM

For this adjustment you use calculated tables

https://docs.flexsim.com/en/21.1/GettingData/AdvancedDataGathering/UsingCalculatedTable/

0 ·

Ryan Clark commented · Jan 19, 2022 at 04:55 PM

Hi @Arvind J, was Felix Möhlmann's answer helpful? If so, please click the "Accept" button at the bottom of their answer. Or if you still have questions, add a comment and we'll continue the conversation.

If we haven't heard back from you within 3 business days we'll auto-accept an answer, but you can always unaccept and comment back to reopen your question.

0 ·

Answer 1 · 2022-01-12T07:20:42Z

Felix Möhlmann answered Jan 12, '22

I see you have already installed the components of the throughput chart. Open the statistics collector "Output for One Week Collector", go to the "Columns" tab and change the increment of the throughput value to 200. Instead of counting up in steps in 1, the value will increase by 200 each time.

1641972013182.png (45.1 KiB)

1641972037966.png (9.9 KiB)

5 |100000

Attachments: Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

question