How simulate crane and operator?

Question

question

Rafael de Assis asked Mar 31, '23 Jason Lightfoot edited Apr 18, '23

How simulate crane and operator?

Modelo coordenação operadores.fsmI'm simulating a special paiting process. I have two operator that are responsable for the station work. the operator number 1 is responsable for the setup and for de move some light flowitems. the operator number 2 ("Pintor") is responsable for painting and move heavy flowitems. the operator number 2 have a crane for help him. in my attempts, I fail in syncronize these two task executers; or the syncronize failed or the operator 1, leaves the task for processor.

Software Version:

FlexSim 21.2.4

crane operator task simultaneous

modelo-coordenacao-operadores.fsm (67.9 KiB)

5 |100000

Attachments: Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Answer 1 · 2023-04-03T22:17:14Z

Patricia_brenny R answered Apr 3, '23 Jason Lightfoot edited Apr 18, '23

Hey there,

I had a look at your model and noticed a problem generating an exception, when your items get their types relabeled after the "mud" queues and are sent back to the beginning of the paiting process, your setup time and process time attempt to access an invalid row on the GlobalTables, since, for example, line 22 does't exist. I suggest you revisit this logic in order to only use valid table row and column numbers, or limit the model simulation time to avoid this issue.

However, I need more information about your question, from what I can see, the "Pintor" is activating the process time correctly, and the "Ajudante" is also carrying the boxes correctly, the Crane is also carrying the boxes as soon as they are available. What is the part that is unsynchronized?

· 6

5 |100000

Attachments: Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Rafael de Assis commented · Apr 05, 2023 at 01:16 AM

Thank for help me. I coudn't to observe your first adivice. if you have something to sugest me, I would like your help. I find this way for to certify that each box complete your cicle inside de process. I drew the fluxogram for your better understanding, Fluxograma.pdf

About the crane, the "pintor" has to control the crane for lift the box with labels 22, 320, 4100 and 5 (The queue "saída do posto" for the queue "buffer de saída". so until now, i wasn't able to combine the "Pintor" and crane inside this operation

0 ·

Patricia_brenny R commented · Apr 05, 2023 at 03:04 PM

Alright,

For the label problem I noticed you're trying to consult using the type number as the row of the column, what I'd recommend is using two labels instead of one (one number label and one text label) , you can use a string type Label to consult on the global table, for that you need to name it exacly as your row is named. For example "Item22" will get the line named Item22 on your table.

For the synchronization part, you'll need to bring all the Pintor activities to the process flow, and sync them using the process flow activities to make sure the order stays the same. Like this:

Here is the model with the applied changes. I added setLabel trigger for a string type label called "TxtType" on the "buffer de entrada", to sync the tables and the consult them correctly for process and setup time.

coordenaçãoDeOperadores_corrected.fsm

0 ·

1680706902859.png (40.0 KiB)

coordenacaodeoperadores-corrected.fsm (76.8 KiB)

Rafael de Assis Patricia_brenny R commented · Apr 07, 2023 at 05:33 PM

Thank you soo much!

I coundn't open this file. Maybe, for my version (21.1.2).

0 ·

Patricia_brenny R Rafael de Assis commented · Apr 10, 2023 at 05:57 PM

this modelo-coordenacao-operadores_corrected_21.1.fsm should work

0 ·

modelo-coordenacao-operadores-corrected-211.fsm (78.2 KiB)

Rafael de Assis commented · Apr 17, 2023 at 12:55 AM

Thank you soo Much Ms. Patricia!

I noted that setup in processor "pintura" changed a little bit, i needed that the operator "ajudante" do the setup, and the operator "Pintor" do the process.

with a new configuration, these operators don't work like before. it were confugurated for 1 only setup if the flowitens in sequence are iquals. now, this options don't work.

if you guide me, i have onother doubt. how I pull to list especific labels... like in this case, the crane only takes labels 5, 22, 320 and 4100.

I tried in: "List Propoerties" - "Add fields to the list" - "Label" - in this part, I don't now, how to appoint.

one more time, thank you!!

0 ·

Jason Lightfoot ♦♦ Rafael de Assis commented · Apr 18, 2023 at 11:39 AM

You put the label name in the edit box.

If you want to check it's in a range of values then you can use an array in a where clause of the pull like:

WHERE mylabel IN [5,22,320,4100]

(for a standalone question like this, please consider asking it in a fresh question in the future - it will avoid any potential responder having to read such a long thread).

0 ·

question