question

Axel Z2 avatar image
0 Likes"
Axel Z2 asked Srinivas G commented

Conditional transport

Hey @Tanner Poulton @Jörg Vogel and everybode else,

i have another Problem with my Simulation. After the seperator i use the robot to transport the engine to the queue1. In fact thats the only transport the robot should make after the separator1. But he also Transports the Adapter from the Separator to the Combiner2 and the Conveyor2. How can i Change the "Use Transport" from the Seperator that he only Transport the enginges from the separator to the queue1 and the Adapter will move automatically to the combiner2 and the conveyor2 without beeing transported by the robot ?

I hope you can help me :)

Best wishes,

Axel

version1.fsm

FlexSim 19.1.1
conditional transport
version1.fsm (46.8 KiB)
5 |100000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

1 Answer

Axel Z2 avatar image
3 Likes"
Axel Z2 answered Srinivas G commented

Ok i found out by myself. In case anybody wants to know how it works. I changed the Use Transport to a conditional Transport with the condition that when the the port is port 2 (queue1) the Transport should be used and otherwise the Transport is not used.


conditional-transport.png (55.3 KiB)
· 1
5 |100000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Srinivas G avatar image Srinivas G commented ·

Thanks for this post. It is very useful

0 Likes 0 ·