question

Fakhrusy Sf avatar image
0 Likes"
Fakhrusy Sf asked Jeanette F commented

How set only one equipment(Mixer) running at one time

1655823831156.png

1655823859098.png

Greetings,

I have an enquiry,

Based on the production schedule below, there are 3 recipe that need to mix. Unfortunately, the mixer can only run one at a time due to safety concern? How do I simulate this?

For example, when premixer engine run, the other two premixer must wait for the premixer engine to finish its process...


Mini_Simulation_OilLubricantsV5.fsm

FlexSim 18.2.3
FloWorksmixer
1655823831156.png (123.6 KiB)
1655823859098.png (142.8 KiB)
mini-simulation-oillubricantsv5.fsm (67.0 KiB)
· 1
5 |100000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Fakhrusy Sf avatar image Fakhrusy Sf commented ·
Each premixer have their designated recipe and they cannot be interchangeable means that only one in order to mix engine we need to use only premixer engine only
May @Patrick Zweekhorst assist me??
0 Likes 0 ·

1 Answer

Patrick Zweekhorst avatar image
0 Likes"
Patrick Zweekhorst answered Jeanette F commented

Hi @Fakhrusy Sf ,

If I understand you correctly you only want at maximum one token active in the selected part of the processFlow?

1655967543709.png

If that is the case you can easily solve it by using a zone with a maximum content of 1. (Like in the attached model).

Good luck!

Patrick

mini-simulation-oillubricantsv5_1.fsm


1655967543709.png (116.5 KiB)
mini-simulation-oillubricantsv5-1.fsm (70.0 KiB)
· 2
5 |100000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Fakhrusy Sf avatar image Fakhrusy Sf commented ·
It works like a charm @Patrick Zweekhorst... Thank youu

How to record the idle time of the mixer_gear & mixer_hydraulic when mixer_engine is running??

0 Likes 0 ·
Jeanette F avatar image Jeanette F ♦♦ Fakhrusy Sf commented ·
Hello @Fakhrusy Sf,

We are happy to provide additional help. Please follow out best practices and start a new post for your new question.

0 Likes 0 ·