question

Dilla Da avatar image
0 Likes"
Dilla Da asked Jeanette F commented

How to set it to fit the time needed

how to set when the 1 second interarrival time of the material goes until the sink to 16 seconds, then after 16 seconds the flow stops in the 100 second dive queue. Then after 100 seconds the flow will go back to the sink?

FlexSim 19.0.0
queueclose and open ports
5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

1 Answer

·
Jeanette F avatar image
1 Like"
Jeanette F answered Jeanette F commented

You can have a process flow source that creates a token to close the port at the 16 second mark and then another that opens the port.

· 5
5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Dilla Da avatar image Dilla Da commented ·

@Jeanette F Please can you give an example with software flexsim?

0 Likes 0 ·
Jeanette F avatar image Jeanette F ♦♦ Dilla Da commented ·
0 Likes 0 ·
1661364558325.png (46.4 KiB)
Dilla Da avatar image Dilla Da Jeanette F ♦♦ commented ·
thank you so much @Jeanette F
0 Likes 0 ·
Show more comments

Write an Answer

Hint: Notify or tag a user in this post by typing @username.

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.