Processor breakdown every time finishing a process

Question

question

Joe L6 asked Oct 17, '22 Joe L6 commented Oct 26, '22

Processor breakdown every time finishing a process

Hi team,

Here's a situation that I want to simulate:

I have an oven that heats the food(10 seconds). Every time I finish heating the food, I will let the oven cool down for 20 seconds. During cool down the oven isn't allowed to use. And after finishing the cool down then the oven is allowed to use again.

PS: The time that the food arrive at the oven is unfixed. So I can't use the MTBF/MTTR function to set when the oven will breakdown.( Or maybe there's a way to reach my situation but I don't know yet. )

I build a model as below:

Breakdown_every_time.fsm

And how can I reach this situation? Thank you!

Software Version:

FlexSim 18.1.2

processor mtbf mttr breakdown

schematic.png (60.4 KiB)

breakdown-every-time.fsm (17.1 KiB)

· 2

5 |100000

Attachments: Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Jeanette F ♦♦ commented · Oct 21, 2022 at 06:38 PM

Hi @Joe L6, was Felix Möhlmann's answer helpful? If so, please click the "Accept" button at the bottom of their answer. Or if you still have questions, add a comment and we'll continue the conversation.

If we haven't heard back from you within 3 business days we'll auto-accept an answer, but you can always unaccept and comment back to reopen your question.

0 ·

Joe L6 Jeanette F ♦♦ commented · Oct 26, 2022 at 12:42 PM

Hi, It's my fault that I didn't reply until now. I promise this falut won't happen again. Thank you!

0 ·

Answer 1 · 2022-10-17T08:29:24Z

Felix Möhlmann answered Oct 17, '22 Joe L6 commented Oct 26, '22

You can close the processor's input in the "On Process Finish" trigger and also send a message after a delay of 20s. In the "On Message" trigger the input can then be opened again.

Additionally, you could set the state to track the "cooling" time vs. the normal "idle" time.

breakdown-every-time_1.fsm

1665995361162.png (16.4 KiB)

breakdown-every-time-1.fsm (148.0 KiB)

· 1

5 |100000

Attachments: Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Joe L6 commented · Oct 26, 2022 at 12:30 PM

HI, Thank for your help and it really helps a lot. I'm sorry that I didn't reply you until now.

1 ·

question