question

Sam A8 avatar image
0 Likes"
Sam A8 asked David Seo answered

Emulation tool

Using the emulation tool can I build the 3D objects as the machinery system and then by using the emulation tool I connect the inputs and outputs in the FlexSim model to the inputs and outputs in the PLC by tag ID without programming so the PLC will enter the values of both inputs and outputs of the FlexSim model.

Is that possible or I still need to make a process flow and program everything and then connect the variables to the PLC?


FlexSim 22.2.2
emulationplcplc emulator
5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

1 Answer

·
David Seo avatar image
0 Likes"
David Seo answered

You can connect the PLC using emulation tool as macine tending or line digital twin.

Input and Output are all possible as you think.

https://docs.flexsim.com/en/22.2/ModelLogic/UsingEmulation/KeyConceptsEmulation/KeyConceptsEmulation.html

https://docs.flexsim.com/en/22.2/Reference/Tools/Emulation/Emulation.html#overview

These link will help you and you can find many issue and sample models in this forum.

5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Write an Answer

Hint: Notify or tag a user in this post by typing @username.

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.