question

Mike avatar image
0 Likes"
Mike asked Mike commented

Kinematic movement of a set of conveyor

Hi,

I am trying to move 3 conveyors siting on each other with 0.5m gap in between vertically up for 1m from current position and down 1m back to original position. However, it doesn't work that way. Could someone help me take a look at the process flow and advise me how it should be fixed? Thanks.

Set of conveyor to move up and down.fsm

FlexSim 23.1.1
having problem with kinematic movement of conveyors
set-of-conveyor-to-move-up-and-down.fsm (146.6 KiB)
5 |100000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

1 Answer

·
Arun Kr avatar image
0 Likes"
Arun Kr answered Mike commented

In the apply kinematics activity for the offset Z location, you need to provide the distance to be moved not the coordinate values. So in your case, it has to be 1 for the upward movement and -1 for the downward movement.

For eg.

1685427045417.png


1685427045417.png (28.2 KiB)
· 1
5 |100000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Mike avatar image Mike commented ·
Thanks :)
0 Likes 0 ·

Write an Answer

Hint: Notify or tag a user in this post by typing @username.

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.