question

Marco Ney avatar image
0 Likes"
Marco Ney asked Allister Wilson edited

Simple Collision Control: Operator to bypass Processor

Hi all,

collision is a very important issue for the 3D visualization of Factory models.

I have tried a basic model to setup the operator to move around a process.

He still moves through it. As the setup is quite simple I wonder what else need to be added.

I did not find a post similar to what I am looking for, all examples are much more high level.

Regards

collision001.fsm

FlexSim 19.0.2
collision avoidance
collision001.fsm (23.2 KiB)
5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

1 Answer

·
Allister Wilson avatar image
0 Likes"
Allister Wilson answered Allister Wilson edited

The simplest way to get movement around obstacles is with the A* navigator.
I added one to your model, see attachment.
If you want to know more about A*, here's the relevant manual page : https://docs.flexsim.com/en/19.0/Reference/Tools/AStar/

19139-collision001-with-astar.fsm


5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Write an Answer

Hint: Notify or tag a user in this post by typing @username.

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.