question

tomonori S avatar image
0 Likes"
tomonori S asked tomonori S commented

Import external data

The processor shape was imported from external data.
I want to place the position of the flow item on the top of the desk like the attached picture “img.jpg”
Is there an easy way other than changing the trigger from the “Set Center Location”?

img.jpg

img-01.jpg

test.fsm

FlexSim 19.0.0
import external data
img.jpg (146.3 KiB)
img-01.jpg (45.8 KiB)
test.fsm (36.7 KiB)
5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

1 Answer

Joshua S avatar image
1 Like"
Joshua S answered tomonori S commented

Yes, you can edit the Shape Factors as show in the picture below, I moved the shape down, but then moved the container of the shape up. The position of the flow item box was based off the container's geometry.

24244-test.fsm


pic1.png (38.5 KiB)
24244-test.fsm (196.7 KiB)
· 1
5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

tomonori S avatar image tomonori S commented ·

It worked with the posted function.
Thank you very much.

0 Likes 0 ·