Different Work Point Loops for Different Types of AGVs?

Question

question

Sofia G21 asked Jul 11, '23 Sofia G21 commented Jul 11, '23

Different Work Point Loops for Different Types of AGVs?

I have a model with 3 different types of AGVs, and their paths overlap in different areas of the layout. Is there a way that I can have different NextWorkPoint or Work Point connections for different AGV types?

Reason for question: I don't want AGV1 going down the Work Point Loop of AGV2.

I looked at the AGV Process Flow template and the AGV Network properties. I have an advanced AGV Process Flow for each of my AGV types. It seems that the NextWorkPoint connections is based on a global list called 'NextWorkPoint'. Would it be as simple as creating a new goblal list NextWorkPoint (i.e. NextWorkPoint2) and updating anywhere in the Process Flow it is referenced? Thus having 3 lists, and each of the 3 AGV Types Process Flows using a different Global list?

Software Version:

FlexSim 22.2.0

agvnetwork agvpath agvcontrol

5 |100000

Attachments: Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Answer 1 · 2023-07-11T13:45:26Z

Felix Möhlmann answered Jul 11, '23 Sofia G21 commented Jul 11, '23

For the most part: Yes, you can just use multiple lists and determine which one to pull from based on some condition, like a label on the AGVs. You can create more connection types in the AGV network properties. If you check the List option, the automatically generated global list will have the necessary partition structure.

If a control point at which items are picked up belongs to multiple loops, you would also need to make sure that only the 'correct' AGVs can pull the respective items (if there is a distinction). For this I would further partition the WorkList by adding a number that signifies which loop the item belongs to to the partition id.

capture.png (21.9 KiB)

capture2.png (24.2 KiB)

· 5

5 |100000

Attachments: Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Sofia G21 commented · Jul 11, 2023 at 01:51 PM

Thanks Felix! Very helpful

As far as your second point, I have different AGVWork item lists for each of the 3 different AGV types. (These are the ones I am sending for 'Use Transport' at different queues) Wouldn't those lists take care of having the "correct" AGV pick up from the control points?

0 ·

Felix Möhlmann Sofia G21 commented · Jul 11, 2023 at 02:01 PM

That can also work, but still needs some adjustments to be made. The AGV template pulls the item off the global list and pushes them back, partitioned by the pickup point. (So the tokens just have to check a single partition instead of filtering the entire list for eligible items to load.) If you want to use three separate lists, you need to change this lower section to also have three tokens pull from one list each. And later have the child tokens on the right also push back to that same list, the items came from.

0 ·

capture.png (49.0 KiB)

Sofia G21 Felix Möhlmann commented · Jul 11, 2023 at 02:19 PM

Felix, that is correct! Part of creating 3 different 'AGV Work' item lists, involves also changing the reference list of the entire process flow. By changing it here, it should do those two things automatically no?

So ultimately, my plan is to have the 3 'AGV Work' item lists, and then, create three separate 'NextWorkPoint' Control Point Connections lists. Would I also need to create 'ParkPoints' and 'PickUpPoints' lists for the newly created 'NextWorkPoint' lists?

0 ·

1689084888074.png (49.5 KiB)

Show more comments

question