question

samsimulation avatar image
0 Likes"
samsimulation asked Felix Möhlmann answered

1 operator using 2 machines

Greetings Everyone,

Thank you for being a great support!

1operator-for-2-machines.png

I'm trying to use one operator for 2 machines.

Basically I'm trying to use one operator for 2 machines.

My idea is to use operator 1 for processor to start processing and immediately go to processor to 2 to start processing and return to processor 1 by the processing for 1 unit part is complete, in this both machine and operator are utlized fully.


But I'm having trouble setting the conditions, please have a look and suggest corrections accordingly.

Model attached.

1 operator 2 machine.fsm

Thank you everyone!

FlexSim 24.0.0
operatorutlization
1operator-for-2-machines.png (265.3 KiB)
1-operator-2-machine.fsm (38.2 KiB)
5 |100000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

1 Answer

Felix Möhlmann avatar image
0 Likes"
Felix Möhlmann answered

If the operator is only needed to start the process and not during the whole process time, then use the "Setup" for that step and do not utilize an operator for the process.

5 |100000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.