After resetting the model, the fluidtank disappears directly

Question

question

happyboy asked Jun 26, '24 Joerg Vogel answered Jun 26, '24

After resetting the model, the fluidtank disappears directly

我在学习流程和流体时遇到了一些问题

在将 fluidtank 用作实体对象后，我想实现此逻辑。首先，将液罐放置在位置 Queue1（此时我已经关闭了它的输入）。当流体管道的容量增加到指定值时，AGV车将流体罐输送到指定位置并恢复其输入。然后，当它的容量达到一定值时，它的输入被关闭，并通过AGV和起重机输送到其他位置进行输出。我已经实现了使用流程转到指定位置并打开输入端口的操作，但是我被困在监听事件容量的变化。我应该如何进行？

每当我重置模型时，我原来的 fluidbank 都会直接消失。我应该如何调整。

附上我的模型，希望尽快收到专家的解答fluidtank.fsm@Felix Möhlmann

Software Version:

FlexSim 24.0.2

processflow fluid object

1719404276599.png (817.7 KiB)

1719404319249.png (915.9 KiB)

fluidtank.fsm (42.2 KiB)

5 |100000

Attachments: Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Answer 1 · 2024-06-26T17:00:30Z

Joerg Vogel answered Jun 26, '24

Any object inside a queue is destroyed on Reset event.

I tested it with an later inserted basic fixed resource object. I set it as an subtree node in object Queue2. I hit reset button and this object get destroyed, too. If I set the Fluid tank being a node in model space up property, then this object stays in your model.

I designated your fluid tank as a selected object. so()

so().as(Object).up = model();

This transfers your tank from sub treenode of Queue2 into the model back. After hitting reset the tank stays in model.

designated-object.jpg (53.0 KiB)

5 |100000

Attachments: Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

question