Double Cycle and Single Cycle in ASRS Simulation

Question

question

Kitty C Suspended asked May 14, '20 Kitty C Suspended commented May 17, '20

Double Cycle and Single Cycle in ASRS Simulation

Hello all,

In ASRS running, sometimes the stacker only bing box from enter and didn't pick box to exit, then bing box form enter again, this is single cycle

Another statues is stacker bing box from enter and pick box to exit, then repeat the process again, this is double cycle

When we make the simulation in flexsim, if boxes is available, the stacker of ASRS always do the double cycle

So my question is how to set the stacker of ASRS to do the simualtion in 30% single cycle and 70% double cycle

My flexsim version is 19.0.0

miniload trainging1 SC and DC.fsm

Software Version:

FlexSim 19.0.9

flexsim 19.0.9 miniload

miniload-trainging1-sc-and-dc.fsm (40.2 KiB)

5 |100000

Attachments: Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Answer 1 · 2020-05-14T14:57:13Z

Benjamin W2 answered May 14, '20 Kitty C Suspended commented May 17, '20

I think the best way to do this is to use a process flow. Please see the image below:

In this model, you push everything that arrives onto a list. Then, your process flow creates a single token that will follow the left path 30% of the time, and the right path 70% of the time.

Here is a great tutorial on how to use lists and process flow:

https://docs.flexsim.com/en/19.0/Tutorials/ProcessFlow/Tutorial1UsingSharedAssets/UsingSharedAssetsOverview/

Here is more information on lists:

https://docs.flexsim.com/en/19.0/ConnectingFlows/Lists/WorkingWithLists/

1589468004968.png (201.4 KiB)

· 6

5 |100000

Attachments: Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Kitty C commented · May 15, 2020 at 06:44 AM

HI @Benjamin W2

I think maybe the whole logic should like as following image

I set the source as following

And the load

but it shows error

Would you mind help me to find out what's wrong with it...

miniload training1 SC and DC.fsm

0 ·

miniload-training1-sc-and-dc.fsm (54.9 KiB)

Joerg Vogel Kitty C commented · May 15, 2020 at 09:55 AM

@Kitty C, there is an issue while editig a post, a comment, an answer or a question.

You have to upload all your attachments again, otherwise the post shows empty boxes. You won't notice it, because the attachments are all in your browser cache. But all other user never see your attachments. So please upload them again! Many Thanks!

0 ·

Kitty C Joerg Vogel commented · May 15, 2020 at 02:33 PM

Hi @Jörg Vogel, I have upload all the attachment again.Now I think they can be seen Thanks for your kindness reminding

0 ·

Show more comments

Benjamin W2 commented · May 15, 2020 at 02:55 PM

Hi @Kitty C,

I just realized that I didn't attach the model. I will attach it in this comment so nothing will get deleted:

miniload-trainging1-sc-and-dc_autosave.fsm

0 ·

miniload-trainging1-sc-and-dc-autosave.fsm (54.7 KiB)

Kitty C Benjamin W2 commented · May 17, 2020 at 02:53 AM

According your model, now I can understand

Thanks a lot

0 ·

question