Idea

Clair A avatar image
18 Likes"
Clair A suggested Joerg Vogel commented

Visual difference between conveyor entry and exit transfers

In the 3D view, entry and exit transfers are drawn with the same shape: a white square.

1631199959461.png

As a result, when you have several entry and exit transfers along a conveyor it's not always obvious which white squares are entry transfers and which ones are exit transfers:

1631200393600.png

It would be helpful if users could see the difference between entry and exit transfers at a glance.

For example, draw an arrow on the transfer showing the flow direction:

1631200827156.png

conveyorexit transferentry transfer
1631200393600.png (11.5 KiB)
1631200827156.png (12.2 KiB)
5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Ireneusz Kaczmar avatar image
0 Likes"
Ireneusz Kaczmar commented

How to add some transfers to the one conveyor?

· 1
5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Joerg Vogel avatar image Joerg Vogel commented ·
Connect a conveyor to another 3D object. This creates automatically a transfer object.
0 Likes 0 ·
Ireneusz Kaczmar avatar image
0 Likes"
Ireneusz Kaczmar commented
How to add some transfers to the conveyor ?
5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Your Opinion Counts

Share your great idea, or help out by voting for other people's ideas.