Task 1.4 - Link the Models : Errors in the Model (Attached)

Question

question

Kj311 asked May 12, '22 Kj311 commented May 13, '22

Task 1.4 - Link the Models : Errors in the Model (Attached)

Task 1.4 - Link the Models.fsm https://docs.flexsim.com/en/22.0/Tutorials/FlexSimBasics/1-4LinkModels/1-4LinkModels.html

I've been following the instructions for linking models, but can't get the dashboards to work. The statistics collector is not coming up automatically - I've also tried creating the charts per the instructions https://docs.flexsim.com/en/22.0/Tutorials/FlexSimBasics/1-3BuildProcessFlow/1-3BuildProcessFlow.html

If someone could take a look at this (MODEL ATTACHED) and send me back to me with the corrections that would be greatly appreciated. Thank you!

Software Version:

FlexSim 22.0.0

dashboards linking models

task-14-link-the-models.fsm (564.3 KiB)

5 |100000

Attachments: Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Answer 1 · 2022-05-13T06:09:52Z

Felix Möhlmann answered May 13, '22 Kj311 commented May 13, '22

It seems you missed points 7-11 from Step 1 (Remove the Flow Logic in the 3D Model).

The waiting line still pushes the customers to a list and service desk 1 is still pulling from it. The processor and process flow logic interfere with each other. The process flow might move the customer out of the processor before the process has finished. When it does later, FlexSim will throw an error because the involved object is no longer available when the finish event fires.

Service Desk 2 is also missing from the respective group which is why it isn't used currently.

task-14-link-the-models_1.fsm

1652422156529.png (17.5 KiB)

task-14-link-the-models-1.fsm (69.7 KiB)

· 1

5 |100000

Attachments: Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Kj311 commented · May 13, 2022 at 01:19 PM

thank you so much, Felix!

0 ·

question