question

Alessio Merlo avatar image
1 Like"
Alessio Merlo asked Ben Wilson commented

PE on a conveyor in a plane

Hi,

I created a complex machine with a plane which contains conveyors and processor. I discovered that if I rotate the plane, the conveyor system doesn't draw correctly the conveyor objects (PE, DP, station) inside the plane.

I attached a very simple model which reproduces my case.

Can you fix it in the next release?

NOTE: I believe that it is only a visual issue because the events trigger correctly (I tested with the photo eye and it works).

peonconveyorinplane.fsm

FlexSim 16.2.0
conveyorphoto eyeplane
5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

1 Answer

Phil BoBo avatar image
2 Likes"
Phil BoBo answered Ben Wilson commented

This has already been fixed in 16.2.0 and 16.0.5.

Move the photoeye a little bit, and then it will draw correctly.

Or execute the following script:

function_s(photoEye,"finalizeSpatialChanges")

Did you build this model in a version prior to 16.2 or 16.0.5?

· 4
5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Alessio Merlo avatar image Alessio Merlo commented ·

Thanks phil!

The command works in the attached model because it is built with 16.2. But my machine is built with flexsim 7.7 and the command doesn't work. Do I change the photoeyes with the last version or there is an other command to use?

0 Likes 0 ·
Phil BoBo avatar image Phil BoBo ♦♦ Alessio Merlo commented ·

This bug is still in 7.7. If you want them to draw correctly, you need to use 16.2 or 16.0.5.

1 Like 1 ·
Alessio Merlo avatar image Alessio Merlo commented ·

I'm testing the model with the machine in Flexsim 16.1.2 and the command doesn't work. Does it work only in 16.2?

0 Likes 0 ·
Phil BoBo avatar image Phil BoBo ♦♦ Alessio Merlo commented ·

Yes. 16.2.0 or 16.0.5.

0 Likes 0 ·