decision point conveyor according to child id

Question

question

Larissa R2 asked Jun 11, '20 Larissa R2 commented Jun 20, '20

decision point conveyor according to child id

I am working on a warehouse model, where orders arrive between 16 to 16 seconds. Each order has 4 boxes to be picked. This model has an order picking system by box, which means that I have 1 operator at each aisle picking the boxes and sending them to a conveyor.

At the end of the conveyor, I have an operator (picker 4) that should pick the items according to the orders and place them in the pallets. I have two issues in my model that I am trying to solve:

First, I created 3 decision points. I need that the boxes that go out the decision points are from the same child id. I don't know how to create this condition in my model.

scenario 3_ pick to box_23SKUs_VS3.fsm

The second issue that I have in my model is that my operator (picker 4) is grabbing all items in the conveyor, and he should grab only items from the same id (maximum 4 items at a time) at the end of the conveyor.

I hope someone can help me solving this issues, I read about parent/child tokens at the manual, but I still don't know how to solve these.

Software Version:

FlexSim 19.2.4

conveyor decision points parent child hierarchy

1591885311933.png (75.5 KiB)

1591885486021.png (75.7 KiB)

scenario-3-pick-to-box-23skus-vs3.fsm (235.3 KiB)

· 1

5 |100000

Attachments: Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Larissa R2 commented · Jun 15, 2020 at 07:39 PM

@Benjamin W2 @tanner.p, any suggestions?

0 ·

Answer 1 · 2020-06-17T18:39:11Z

tannerp answered Jun 17, '20 Larissa R2 commented Jun 20, '20

@Larissa R2,

I decided to batch the items as they're dropped off at their respective conveyors and then release them one by one as they arrive at the decision points. The Zone makes sure that only one "list" of items is handled at a time. It's important that we aggregate the labels at the batch activity so that we know what the last item is that should cross DP1. The Wait for Event listens for that last item to cross the DP1.

Here's the model: scenario-3-pick-to-box-23skus-vs3 (2)_1.fsm

Let me know if it helps.

larissa-help-batching.png (24.8 KiB)

scenario-3-pick-to-box-23skus-vs3-2-1.fsm (242.7 KiB)

· 1

5 |100000

Attachments: Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Larissa R2 commented · Jun 20, 2020 at 04:56 PM

@tanner.p and @Brenton King, thanks very much for helping me to solve these issues. It really helped, I appreciate your help :)

0 ·

Answer 2 · 2020-06-17T18:43:10Z

Brenton King answered Jun 17, '20 Brenton King commented Jun 17, '20

@Larissa R2

The main order token needs to have a unique label on it. Let's say OrderID. This label then needs to be on all of the items as well. You can add the label whenever it is added to the order. This is how that would look when executed properly:

After you have the labels, you need to create a merge controller. This can be a simple process flow where each item on the conveyor gets stopped, adds itself to a list, and waits to be pulled off of the list by the controller. The controller tries to pull a matching order item if there is one available, if not it will start the next order. Here is an example of what I mean:

I didn't actually implement this in your model but hopefully this helps.

1592419181681.png (60.8 KiB)

1592419192147.png (518.2 KiB)

1592419345412.png (518.2 KiB)

1592419354556.png (70.4 KiB)

· 1

5 |100000

Attachments: Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Brenton King ♦ commented · Jun 17, 2020 at 06:46 PM

There are almost always multiple ways of doing something though. I see that Tanner responded as well with a different method. Just do whatever makes sense to you.

0 ·

Answer 3 · 2020-06-12T21:45:33Z

Brenton King answered Jun 12, '20 Larissa R2 commented Jun 16, '20

@Larissa R2

For issue 1, you are talking about a 3 to 1 merge. I think I understand that you would like your items to stay together on the conveyor if they are from the same order. Is that correct? Would each item need to stop and be scanned to make sure it continues on? If this is the case, I think your merge point needs a process flow that controls which item comes next. This would be done by pushing every item to a list when it hits the merge point, stopping the item, then having the merge point pull items off of the list in the order you would like. The other issue becomes having some sort of label on each item that groups them together. Process flow can write labels on associated items. I'm just trying to make my best guess at what you are talking about with childID. I would just write this childID on each item.

As for issue 2, it is very similar to issue 1. You need to have a process flow for that operator that represents his brain and which item he is going to pull next. When items arrive in the removal area they push themselves to a list. The operator has a loop that pulls the best/desired item off of the list.

· 5

5 |100000

Attachments: Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Larissa R2 commented · Jun 14, 2020 at 11:15 PM

@Brenton King, "I think I understand that you would like your items to stay together on the conveyor if they are from the same order. Is that correct? " Yes, this is exactly what I need.

"This would be done by pushing every item to a list when it hits the merge point, stopping the item, then having the merge point pull items off of the list in the order you would like. " I am not sure how to merge items from the same order to a list, and I don't know either how to check if the items are from the same list on the decision point.

0 ·

tannerp Larissa R2 commented · Jun 15, 2020 at 09:04 PM

@Larissa R2,

What defines an item "list"? Is it referencing a table value or something? If so, you can just parse through that list and check to see if the current item is included. I'm not sure exactly what you mean with your second question.

0 ·

Larissa R2 tannerp commented · Jun 15, 2020 at 10:38 PM

A list should be composed by 4 SKU items. The activity 'do order picking' makes pickers grab items according to the list. I don't know how to check if the items that arrive in decision points are from the same list. Also, picker 4 should grab only the 4 items at the end of the conveyor line.

0 ·

1592260421736.png (78.4 KiB)

Show more comments

question