question

SudheerReddy avatar image
0 Likes"
SudheerReddy asked Phil BoBo answered

Control point delay using way point logic

As shown in below image

AGV is travelling from Control point 1 to Control Point 3. At Control Point 2 I need to delay for certain time I would like to use Way point logic here. When I tried using way point it is not working.

Attached model for your reference. Any feedback how to achieve that.

CPdelayWayPoint.fsm

waypoint.png

FlexSim 21.1.3
agvwaypoint
waypoint.png (48.7 KiB)
cpdelaywaypoint.fsm (97.0 KiB)
5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

1 Answer

·
Phil BoBo avatar image
0 Likes"
Phil BoBo answered

The waypoint logic pick options are designed to work as a series of operations to do in a row at that waypoint.

After redirecting and waiting a given delay time, you need to then redirect the agv back to its original destination:

1626105258158.png

cpdelaywaypoint_1.fsm


5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Write an Answer

Hint: Notify or tag a user in this post by typing @username.

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.