question

Tuan avatar image
0 Likes"
Tuan asked Matthew Gillespie answered

How to set which floor the elevator does not stop

My model has two elevators, and the transportation logic I use is A*.

How do I set the first elevator only travel to the second floor,and the first elevator don't stop on the third floor.The second elevator only travel to the third floor,and the second elevator don't stop on the second floor.

電梯模擬A.fsm

FlexSim 19.2.4
elevatorastar navigator
電梯模擬a.fsm (69.1 KiB)
5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

1 Answer

Matthew Gillespie avatar image
0 Likes"
Matthew Gillespie answered Tuan commented

The easiest way to do this is to adjust the height of the elevators and the location of the grids so that the elevators only intersect with the grids they can go to For example:

a_updated.fsm

1641235731054.png


1641235731054.png (106.4 KiB)
a-updated.fsm (69.0 KiB)
5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.