One task executer, two queues. sequence of tasks with process flow

Question

question

Rania A asked Feb 9, '22 Rania A commented Feb 10, '22

One task executer, two queues. sequence of tasks with process flow

Hello There,

I have an end-of-aisle storage system with an ASRS in between. My aisle has two Input points Queue one and Queue 2. one is on the left side and the other on the right side

I want to make tthis sequence in the process flow:

The ASRS starts from Queue1 picks up items from Queue1 and storage them in available slots in a random way . Then if there are Items in Queue 2 goes there, if not it goes back to Queue1.

My initial thought was that somehow I will need to use the decide point, but as I am relatively new to flexsim I have a hard time understanding its usage.

Any advise would be helpful.

Software Version:

FlexSim 20.0.10

storage system rack storage

· 1

5 |100000

Attachments: Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Zach T commented · Feb 09, 2022 at 10:31 PM

Hi @Nina A,

It's hard to know how to help without looking at your model. To receive a more accurate solution, please post your model or a sample model that demonstrates your question.

Proprietary models can be posted as a private question visible only to FlexSim U.S. support staff. You can also contact your local FlexSim distributor for phone or email help.

0 ·

Answer 1 · 2022-02-10T12:16:38Z

Jason Lightfoot answered Feb 10, '22 Rania A commented Feb 10, '22

That just sounds like you should put the items in a list and sort them by priority when you try to pull each one - in this case those in queue 2 having higher priority than queue 1.

· 1

5 |100000

Attachments: Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Rania A commented · Feb 10, 2022 at 06:02 PM

Thank you very much for your answer! I think your answer actually led me to the right approach to solving my problem.

0 ·

question