Hello all,
Now I am using the default Advanced AGV template for my work (one in the below pic)
As part of my work I created a two coloumns of pickup and drop off locations in my global table
Now I would like to add the above global table data of pickup locations in load process (in below pic) and droffoff locations in the unload process (in below pic )
When i assigned this global table in unload process AGV is not recognising the desinations
Please, can anyone suggest me how to solve this issue
The AGV Process Flow Templates use control point connections to refer to pickup and dropoff points (as well as other types), as is explained in the tutorial.
If you want to automate the process of adding those connections than you can use the commands below the model reset trigger to adjust the connections based on the data in the table.
/* Add a connection; connectionType should be the row of the wanted connection the "Control Point Connections" list in the AGV properties (for example 5 for pickup) */ function_s(fromPoint, "addConnection", connectionType, toPoint) // Remove a connection; only works automatically if there is only one connection present contextdragconnection(fromPoint, toPoint, "Q");
@Felix Möhlmann Thankyou very much for your answer. Could you guide me where I should add this code?
Should I have to add it into the Globallists/Dropoffpoints ? if so in to which expression lable I should attach the code?
Hello @Ajay M,
From reading @Felix Möhlmann answer, I believe he intended you to put the code in a model reset trigger.
Thankyou very much @Jeanette F for your reply. I added the above code into Model reset trigger but it was showing an error in the below pic. Could you please help me?
Since you approached FlexSim Germany by E-Mail I got to see your model and now have (I think) a better understanding of what you want to achieve.
In terms of the AGV Process Flow template, Pickup and Dropoff Points are surrogate positions that allow an AGV to load/unload at multiple different control points per location. My original answer assumed that your question was aimed at this.
If I understood your model correctly, your goal is to just determine the destination of the item, depending on where it was loaded from, correct?
To do that, I would not change the Process Flow at all. It assumes that the target destination of the item is present as a label called "destination" on the item. So what you can do is write that label onto the item in the "On Exit" trigger of the queues, by searching for the row that contains the current queue in the "PickUpPoint" column and writing the corresponding "DropOffPoint" value to the label.
// Find destination from table
Table PP1 = Table("PP1");
int row = PP1.getRowByKey(current.name, 6);
item.destination = Model.find(PP1[row][7]);
There are also some more issues in your model:
- Every control at which an AGV might end up at after a task should have a "NextWorkPoint" connection, so the AGV continues to travel after the task is done. Otherwise it would get stuck.
- The Process Flow only looks at the first connection of any type. So a control having more than one "NextWorkPoint" connections will not have any effect. The Process Flow template is build on the assumption that those connections form a loop, with outlying points being incorporated through work forwarding.
- You also have to make sure that only a single AGV can enter dead end paths at a time, otherwise the AGVs might cause a deadlock situation. You can use a control area for this.
I'll attach a modified version of your model, I hope that is Ok. Items are only created at P2 and are transported between the queues Q2, Q4 and Q8. Other rows in the PP1 table contain queue names that are not actually present in the model (Q5, Q7), so I left those out for now.
The relevant queues have the On Exit trigger set and the AGV Process Flow was replaced by a new, unaltered one.
Respected @Felix Möhlmann
Your response is really fantastic! Yes, my objective is to determine an item's destination depending on where it was loaded.
Your logic almost answered my problem, but I have one more question for you.
I created two flow items in the above model and allocated them to different processors.
If you look at this model, Processor P1 processes two different flow items at the same time, and Q1 receives both flow items.
And these both flow items have different destinations where they should reach
Here in this model discussion2-1_2flowitems.fsm
Flowitem 1 loaded from Q1 and its Destination is D1 and
Flow item 2 loaded from Q1 and its Destination is Q5
I modified your logic in 'On Exit' trigger of Q1 to achieve the above scenario, instead AGV is delivering both the items to Q5
Could you please help me in solving the above scenario?
16 People are following this question.
FlexSim can help you understand and improve any system or process. Transform your existing data into accurate predictions.
FlexSim is a fully 3D simulation software environment. FlexSim can be used to simulate any process in any industry.
FlexSim®, FlexSim Healthcare™, Problem Solved.®, the FlexSim logo, the FlexSim X-mark, and the FlexSim Healthcare logo with stylized Caduceus mark are trademarks of FlexSim Software Products, Inc. All rights reserved.