Transfer item on conveyors not centered

Question

question

Anna Lisa Dierking asked May 31, '18 Isaac Litster commented Jun 13, '18

Transfer item on conveyors not centered

Hello,

one part of my model is supposed to look similar to what is pictured below.

There is one feeding conveyor that conveyors the items not centered because the first part of the conveyor has a roller skew angle of 5.

The item then stops at the photo eye and is suppose to go up or down depending on a destination label.

The problem I'm having is that I need the items to convey on one side of the conveyor right away and not starting in the center of the conveyor. (similar to my problem here: old FlexSim Forum)

I used to be able to work around it using a skew angle of 90 and -90. But FlexSim only allows values between -45 and 45 now.

So is there a way the items travel on the skinny conveyor, until they are stopped at the photo eye and then have a smooth transfer up or down travelling on one side of the conveyor?

Software Version:

FlexSim 18.1.1

conveyor conveyor module

conveyors.png (303.1 KiB)

5 |100000

Attachments: Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Answer 1 · 2018-06-13T11:03:22Z

Anna Lisa Dierking answered Jun 13, '18 Isaac Litster commented Jun 13, '18

I got it to work now by moving the entry transfers to the side of the conveyer and changing its position dynamically, considering the size of the item.

I attached an example.

@Isaac L

con-forun.fsm

con-forun.fsm (47.0 KiB)

· 1

5 |100000

Attachments: Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Isaac Litster commented · Jun 13, 2018 at 02:03 PM

Glad you figured it out. Let us know if you need any more help with anything.

1 ·

Answer 2 · 2018-06-11T11:41:54Z

Joerg Vogel answered Jun 11, '18

Hello Anna,

if the standard transfers don't work, I use a processor with animation to accomplish the behavior.

transfer-item-conveyor-by-processor.fsm

transfer-item-on-processor.gif (1.5 MiB)

transfer-item-conveyor-by-processor.fsm (33.3 KiB)

5 |100000

Attachments: Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Answer 3 · 2018-06-01T02:44:33Z

David Seo answered Jun 1, '18 Isaac Litster commented Jun 12, '18

@Anna Lisa Dierking

You can make items translated to the side-edge to use 'Decision Point' object on the conveyor and On Arrival trigger you can make items translated using Pick option menu of Movement > Translate Items.

· 7

5 |100000

Attachments: Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Anna Lisa Dierking commented · Jun 01, 2018 at 06:27 AM

Thank you @david.seo but that is not what I am looking for.

When the item moves from the skinny conveyor to one of the side conveyors, the item uses the center to enter the conveyor. I can use a decision point there to move it over, but it does not make for a smooth transfer, since the item has to go to the photo eye with its leading edge and then move over to the side conveyor.When I use the decision point, the item looks a bit "jumpy", because it "jumps back to enter the side conveyor centered.

0 ·

David Seo Anna Lisa Dierking commented · Jun 01, 2018 at 07:43 AM

@Anna Lisa Dierking

Did you use the transfer distance or time control not jumpy?

0 ·

Anna Lisa Dierking David Seo commented · Jun 01, 2018 at 01:24 PM

I use "translate item over time" but time = 0, since the Item should be on one side right away when it enters the conveyor

0 ·

Show more comments

Anna Lisa Dierking commented · Jun 04, 2018 at 07:43 AM

I'm sorry, I don't understand that.

Here is a snippet of my old model where I used skew angle = 90. I want my new model to behave like this when it comes to transfering an item from one coveyor to an upper/lower one.

The only difference: in my new model the items are conveyed on one side of the skinny conveyor due to skew angle = 5.

0 ·

Anna Lisa Dierking Anna Lisa Dierking commented · Jun 11, 2018 at 07:28 AM

Does nobody have any other idea?

0 ·

Isaac Litster Anna Lisa Dierking commented · Jun 12, 2018 at 02:31 PM

Are you able to upload a model so we can better understand how to fix your problem?

1 ·

question