question

Gary Q avatar image
0 Likes"
Gary Q asked Gary Q commented

configuration Task executer

Good evening I would like your help for the following problem:

In a process you need an operator and a transpallet to take a product to store, in this case the product would be a flowitem, the operator a task executer, I have doubts about how the transapallet would represent, that is, the operator goes through the transpallet and pick up the product, I would greatly appreciate your help with an example. Thank you.

FlexSim 18.2.2
operatortask executer
· 2
5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Jeff Nordgren avatar image Jeff Nordgren commented ·
@Gary Q

Could you send in your model or a sample model of the problem? You mention that the transporter goes through the transpallet but without a model to look at it would be very difficult to give you an accurate answer to your question.

Thanks.

0 Likes 0 ·
Gary Q avatar image Gary Q Jeff Nordgren commented ·

@Jeff Nordgren

Here is the model:
the taskexecuter 1 should be the transpallet, it could be said that the flowitem needs the operator and the trasnspallets (task executer1) to send the product due to the weight of the product I hope your help thanks.operator.fsm
0 Likes 0 ·
operator.fsm (22.2 KiB)

1 Answer

Joshua S avatar image
0 Likes"
Joshua S answered Gary Q commented

Is this visually what you are looking for? 15441-operator.fsm


15441-operator.fsm (187.5 KiB)
· 11
5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Gary Q avatar image Gary Q commented ·
@Joshua S

yes thanks, if I have any questions I will let you know

Thanks for the help
0 Likes 0 ·
Gary Q avatar image Gary Q commented ·

@Joshua S

I have problems in performing the task, this time for a set of operators, using a dispatcher
0 Likes 0 ·
Joshua S avatar image Joshua S Gary Q commented ·

@Gary Q

Can you send your model, the model I sent was custom tailored to your previous process, and won't work for a dispatcher. You would need build a dispatching type of system in process flow.

0 Likes 0 ·
Gary Q avatar image Gary Q Joshua S commented ·
@Joshua S

Here is the model, in this case are more operators, the operation should be like the previous model that sent me

I would like your help operator.fsm
0 Likes 0 ·
operator.fsm (36.3 KiB)
Show more comments
Gary Q avatar image Gary Q Gary Q commented ·
@Joshua S

Thanks for the help

0 Likes 0 ·
Gary Q avatar image Gary Q Gary Q commented ·

@Joshua S

sorry, how can I make it so that the conditions of the model are met, where there are separators and queues where the requirements are by type of item groups.fsm
0 Likes 0 ·
groups.fsm (1.4 MiB)