question

Cayo E avatar image
0 Likes"
Cayo E asked Joshua S commented

Open/close output

Hi,

I have a problem in my model.

The processors (Pesagem 01,02,03) only output when processor (Homogeneizador) also output.The objects not can be sent for the processor (Transporte), only will transport when the processor (Homogeneizador) finished the process. First time is normal, when objects are inserted at (Homogeneizador) the processors (Pesagem 01,02,03) should wait the process finish.

FlexSim 19.0.2
input portoutput port
linha-01.fsm (29.9 KiB)
· 2
5 |100000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Cayo E avatar image Cayo E commented ·

This problem I resolved.

I have another problem, Processor (Homogeneizador) only receive objects when processors (Resfriamento Reação 01,02) finish process.

0 Likes 0 ·
ligas.png (94.1 KiB)
Cayo E avatar image Cayo E Cayo E commented ·

The file.

0 Likes 0 ·
linha-01.fsm (30.0 KiB)

1 Answer

Joshua S avatar image
0 Likes"
Joshua S answered Joshua S commented

All the changes I made can be found in your process flow.

18501-linha-01.fsm


18501-linha-01.fsm (36.6 KiB)
· 6
5 |100000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Cayo E avatar image Cayo E commented ·

Joshua,

My processor ("Transporte" in english "Transporter") not can receive objects while the processor "Homogeneizador" only when you are free to operate.

At the attached it is possible you see a creation of queue after "Transporte".

All processor works in function of processors ("Resfriamento Reação 1 and 2" in english "Reactor Cooling").

While ("Resfriamento Reação 1 and 2" in english "Reactor Cooling") not end the process, the processor ("Transporte" in english "Transporter") not can receive object.

0 Likes 0 ·
file.png (82.9 KiB)
Joshua S avatar image Joshua S Cayo E commented ·

I don't understand completely what you want, but you can do all of this by using OnExit or "OnEntry" triggers, and open and close ports on different processors, just make sure you have a rest trigger that defaults the processors ports to open or close as needed.

0 Likes 0 ·
Cayo E avatar image Cayo E Joshua S commented ·

I can not configure this, because, I need set up the process so that to "Transporter" only blocks the input when processing six objects. The logic I created are incorrect, because it does not processing six objects, it is processing only one and then closing the input port.

0 Likes 0 ·
linha-01-rev-02.fsm (38.1 KiB)
Show more comments