Reduce speed of transporter based on shift timings

Question

question

hermione12 asked Nov 10, '22 hermione12 answered Nov 13, '22

Reduce speed of transporter based on shift timings

Hello,

I have a model in which transporter follows a specific network path and delivers items. For a particular path from network node NN2 to NN3 to NN4, I want to reduce the speed of transporter only in that path depending on the shift timings mentioned in the timetable as per model time .

The speeds of the transporter is given in global table. I want to control the max speed of transporter through global table values.

Also what state to use in the time table so as to control the transporter speed.

How to achieve this? Please help

forklift_speed_reduction_shifttimings.fsm

Software Version:

FlexSim 20.0.10

forklift speed timetable

forklift-speed-reduction-shifttimings.fsm (33.2 KiB)

· 7

5 |100000

Attachments: Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Sri_vikas K commented · Nov 10, 2022 at 10:32 AM

Hi @hermione12

Controlling the speed on particular path is easy using the AGV paths. Did you consider that already?

Please refer to the model below how you can control the speed of the agv paths.

toolbox > agv paths> and load and unload speed.

forklift-speed-reduction-shifttimings_SVK.fsm

0 ·

forklift-speed-reduction-shifttimings-svk.fsm (40.7 KiB)

hermione12 Sri_vikas K commented · Nov 11, 2022 at 04:22 AM

Hi @Sri_vikas K can you please attach the model in 20.0.10 version? I am using the same version version and will be able to view your model

0 ·

Sri_vikas K hermione12 commented · Nov 11, 2022 at 04:31 AM

I am so sorry, Unfortunately I do not have that version.

you can refer to the above image to adjust the speed on the path.

forward speed and reverse speed.You can give the numbers directly.

0 ·

agv-properties.jpg (72.1 KiB)

Show more comments

Jason Lightfoot ♦♦ commented · Nov 10, 2022 at 02:20 PM

You can refer to this post on how to update the AGV speed tables.

0 ·

hermione12 Jason Lightfoot ♦♦ commented · Nov 11, 2022 at 05:02 AM

Thank you @Jason Lightfoot

But I want to control the transporter speed based on shift timings. how to do that?

0 ·

Jason Lightfoot ♦♦ hermione12 commented · Nov 11, 2022 at 01:36 PM

Sorry - I saw Sri's comment and answered about that - but you're not using AGVs.

0 ·

Answer 1 · 2022-11-11T08:31:49Z

Felix Möhlmann answered Nov 11, '22

Have a label on the network nodes that controls whether they reduce the speed of passing travelers.

Depending on its value, set the maxspeed variable in the On Arrival trigger. Which value of "fromedge" triggers the reduction depends on the order in which the nodes were connected.

Object current = ownerobject(c);
Object traveler = param(1);
int toedge = param(2); //the number of the edge that the traveler is going to next
int fromedge = param(3); // the number of the edge the traveler came from

if(fromedge == 1 && current.ReduceSpeed == 1)
{
    traveler.setVariable("maxspeed", Table("GlobalTable1")[1][2]);
}
else
{
    traveler.setVariable("maxspeed", Table("GlobalTable1")[1][1]);
}

Switch the label value in the Down/Resume Function of the time table to switch the behaviour on and off.

forklift-speed-reduction-shifttimings_1.fsm

1668155391730.png (3.7 KiB)

1668155486267.png (24.5 KiB)

forklift-speed-reduction-shifttimings-1.fsm (31.6 KiB)

· 2

5 |100000

Attachments: Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

hermione12 commented · Nov 11, 2022 at 12:38 PM

Thank you @Felix Möhlmann

For the same network node path, I want to control the speed during specific timings such as from 9:00 to 9:30 AM the speed reduction should happen, after that time period the forklift speed should be updated to original speed. In my model, model time starts at 8:00 AM.

In this case, where to include code and what logic to be used?

0 ·

Felix Möhlmann hermione12 commented · Nov 11, 2022 at 01:05 PM

The logic above to build to allow that. In the time marked as downtime in the time table, the speed will stay the same (non-reduced) and during the "active" time in the time table it will be reduced when reaching the edge nodes from one of the queues.

forklift-speed-reduction-shifttimings_2.fsm

0 ·

1668171922325.png (18.8 KiB)

forklift-speed-reduction-shifttimings-2.fsm (103.9 KiB)

Answer 2 · 2022-11-13T08:01:50Z

hermione12 answered Nov 13, '22

Thank you @Felix Möhlmann it is perfect

5 |100000

Attachments: Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

question