question

Ana Ta avatar image
0 Likes"
Ana Ta asked Ana Ta commented

Using robot

Hello,

I have very simple model in which I would like the robot gets a box from the conveyor and put it on another conveyor. Unfortunately, the conveyor doesn't have the option "use transport" which allows me to do what I want. Does anyone have an idea what I have to do?

PS: I need to use conveyor. I cannot use Queue instead.

Thanks a lot,

FlexSim 17.2.1
conveyorrobot
5 |100000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

1 Answer

·
Ralf Gruber avatar image
1 Like"
Ralf Gruber answered Ana Ta commented

Hi @Ana Ta,

with the conveyors the transport is not initiated from the conveyor itself, but from the exit transfer, the little white square at the end of the conveyor when you connect it to the following object. Double click the exit transfer and you will see the usual transport options. Attached is a little sample model.

20170913-sampletransportfromconveyor-rg.fsm

Good luck

Ralf


20170913-sampletransportfromconveyor-rg.fsm (33.0 KiB)
· 1
5 |100000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Ana Ta avatar image Ana Ta commented ·

@Ralf Gruber Thanks a lot. It is working now :-)

0 Likes 0 ·

Write an Answer

Hint: Notify or tag a user in this post by typing @username.

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.