question

Carlos L3 avatar image
1 Like"
Carlos L3 asked gilbert jerald answered

Use alternative route for my AGV

Hi forum, i have one question. In my model I have two agv which pick up the load and leave it where the other agv is parked. What I would like is the agv use the alternative path and wait for the discharge area to be released

prueba-agvs-camino-alternativo.fsm

FlexSim 18.1.2
agvagv path
prueba-agvs-camino-alternativo.fsm (37.6 KiB)
· 4
5 |100000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

tannerp avatar image tannerp commented ·

Have you looked at the tutorials for the AGV network? I'd recommend looking at those to get started if you haven't before. They are useful for collision avoidance like this and can be found in the user manual as shown below:

1 Like 1 ·
agv-tutorial.png (147.4 KiB)
Carlos L3 avatar image Carlos L3 commented ·

thanks for the support but i check de tutorial, i change on quick propierties of control point but the problem dont be solution; i have AGV dead lock. I want if the control point its occuped take other path and wait

0 Likes 0 ·
Carlos L3 avatar image Carlos L3 Carlos L3 commented ·

I want one of the AGV chose another path if the other AGV is occuped the dropoff zone and wait in one control point and go to unload if the other AGV leave this zone and viceversa. This is my problem. I tried to add more control points but the deadlook still in my problem

0 Likes 0 ·
Isaac Litster avatar image Isaac Litster commented ·

Is this more of what you are looking for?

agv-path.fsm

0 Likes 0 ·
agv-path.fsm (36.0 KiB)

1 Answer

gilbert jerald avatar image
2 Likes"
gilbert jerald answered

@Carlos L3

Hi Carlos,

As per your constraint, I have built an AGV model that took an alternative path to drop the item in respective location when one path is occupied by any one of the AGV.

I have attached the model for your reference have a look at it.

support-1.fsm

Note: Flexsim has provided and AGV template in the process flow with that try to learn how to control AGV in 3D model by using this AGV template. This will teach you how to create different types of movent as per your expectation usingAGV moreover as @Tanner Poulton said you can learn the basic of the AGV from the tutorial which is provided by flexsim.

Thanks.


support-1.fsm (38.7 KiB)
5 |100000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.