question

Patrick Zweekhorst avatar image
0 Likes"
Patrick Zweekhorst asked Phil BoBo answered

AGV path in a rotated plane don't work

Hi,

I have some problems with moving AGV paths into planes. As I understood it this should be possible (and make copy pasting AGV path a lot easier). When you move some paths into a plane and move the plane around the path transfers don’t move along with it:

This is solved after pressing “Refresh path links”, so this is not such a big problem.

The real problem is when you move the paths in a plane that is rotated, if you do that everything goes wrong:

Is moving AGV paths in a rotated shape not supported or is this a bug that should be fixed?
Any work around for this would also be appreciated.

Thank you for your time

FlexSim 20.1.3
flexsim 20.1.3planeagv pathscontainerrotated
1592918231705.png (20.3 KiB)
agvcontainer.gif (472.9 KiB)
· 2
5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Joerg Vogel avatar image Joerg Vogel commented ·

I have done this in a different version in a different order.

please see this here. Plane and path system have the same orientation. Then I move the paths, control points and navigator into the plane. Then I rotate the plane and the vehicle travels on the paths.

0 Likes 0 ·
Patrick Zweekhorst avatar image Patrick Zweekhorst Joerg Vogel commented ·

Hi @Jörg Vogel, Thanks for the reply, I noted that when testing before. However I already have a plane in my model which is rotated. I want to move the AGV paths into that plane before copying the plane.

0 Likes 0 ·

1 Answer

Phil BoBo avatar image
0 Likes"
Phil BoBo answered

This is a bug. I'll add a case to the dev list. Thanks.

5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.