question

Craig DIckson avatar image
0 Likes"
Craig DIckson asked Craig DIckson commented

Modeling a "slapper line" conveyor

Is there a good way to model placing cartons or totes at an ad hoc location along a (long) conveyor, presumably using process flow?

Currently I create a number of queues along the conveyor and then A-connect them to the conveyor to create a series of entry transfers. Then my process flow moves the carton into the nearest entry transfer when the picker is done. But since there are a limited number of transfers, sometimes the carton enters the conveyor behind the operator and sometimes downstream. I'd rather be able to have my process flow just place the carton on the conveyor at a specific location.

Barring that, is it possible to create entry transfers without going through the extra step of creating, connecting and hiding a bunch of superfluous queues?

Thanks for your help

Craig


FlexSim 20.1.3
conveyorflexsim 20.1.3entry transfer
5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

1 Answer

Jordan Johnson avatar image
0 Likes"
Jordan Johnson answered Craig DIckson commented

First, you can make a really long entry transfer:

To make it, you can A-connect something to the conveyor. On the resulting transfer, you can right click it, and choose to remove the connections. That leaves a transfer with no connections.

Then, you can move the transfer to the side, and use the red arrows on it to stretch it out. Once you've done that, then you can set the location of a box to near where you want it to go, and move it into the transfer. The attached model does that:

SlapperDemo.fsm


1598042670575.png (118.7 KiB)
slapperdemo.fsm (41.5 KiB)
· 4
5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.