question

Nicolas M6 avatar image
0 Likes"
Nicolas M6 asked Joerg Vogel commented

Can you help me to solve the LINK PARITY ERROR(shapeautoload) error ?

I thing the error is from "OnReset_DisposeEspaceRestau" user command, but I'm not able to understand. Thanks in advance.

20210528_HdL_Edit_DispositionPointsDepart_start_1_TablePointsArrivesAterminer.fsm

FlexSim 21.0.0
error messagelinkparityerror
5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Nicolas M6 avatar image
0 Likes"
Nicolas M6 answered

When I "open default workspace" the error disappears. But sometimes, it comes again...

5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Steven Hamoen avatar image
1 Like"
Steven Hamoen answered Joerg Vogel commented

@Nicolas M6 I have downloaded your model and run it with version 21.0.5. passed 50.000 seconds. I didn't get any errors. So maybe update your license?

· 4
5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Nicolas M6 avatar image Nicolas M6 commented ·

I ran it with 21.0.5 too but the error still exists


0 Likes 0 ·
1622462932193.png (131.1 KiB)
Steven Hamoen avatar image Steven Hamoen commented ·

@Nicolas M6 It is not by chance an old error that is saved in the model? If you ctrl+a in the system console and delete, does it appears again?
You could check if you have the latest driver for your graphics card and that FlexSim uses the graphics card. Otherwise I can't think of anything else..

0 Likes 0 ·
Nicolas M6 avatar image Nicolas M6 Steven Hamoen commented ·
  • system console and delete, does it appears again : yes
  • latest driver for your graphics card and that FlexSim uses the graphics card : ok

When I "open default workspace" the error disappears. But sometimes, it comes again...


0 Likes 0 ·
Joerg Vogel avatar image Joerg Vogel Nicolas M6 commented ·

From @tanner.p comment here, the node is not present where it should be. Do you rename a shape, do you delete a shape, do you move a shape? Is there any action in your model that involves any kind of shape manipulation? Are your shapes all integrated in your model or do you load them while running your model? is the directory of involved shapes still present in your system? If it is an user command, do you call it and parsing all needed parameters always? Are there default values for not parsed parameter values? Do they make sense?

0 Likes 0 ·

Write an Answer

Hint: Notify or tag a user in this post by typing @username.

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.