question

Farah_najihah A avatar image
0 Likes"
Farah_najihah A asked Felix Möhlmann commented

agv destination error

FT HBW.fsmwhat is happening here and how do I fix this? I added more decision points, it works fine at first but at a certain point for example at the 600th seconds this error appears. I attach my model together in this.

Thanks in advance!

FT HBW.fsm1652347384429.png

FlexSim 22.1.1
agvagvpathdestination error
1652347384429.png (59.7 KiB)
ft-hbw.fsm (14.2 MiB)
ft-hbw.fsm (14.2 MiB)
5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

1 Answer

·
Felix Möhlmann avatar image
0 Likes"
Felix Möhlmann answered Felix Möhlmann commented

Processor2 is sending an item to the connected conveyor. That entry transfer is not connected to the agv network, so the AGV can't find a path to it.

1652349603865.png

I doubt Processor2 (or 5 and 6) are supposed to use AGV to send the items to the conveyors? So you should deactivate the "Use Transport" for those.


1652349603865.png (282.2 KiB)
· 4
5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Farah_najihah A avatar image Farah_najihah A commented ·

@Felix Möhlmann Thank you that works! May I ask you another question? what about this error? and why does my agv does not collect from processor4? did I misconnect anything? and I tried to add another agv but the 2nd agv does not move at all. Correct me if I'm wrong, to add a 2nd agv, after adding a new task executor, I will need to connect the taskexecutor to the dispatcher and the first decision point only right? is there any other step to it?1652365572849.png

0 Likes 0 ·
1652365572849.png (50.9 KiB)
Felix Möhlmann avatar image Felix Möhlmann Farah_najihah A commented ·
From the looks of those message, an object that does not have a 'Location' connection to a control is pushing an item to the AGV work list.

Since you are using the AGV process flow you don't actually need a dispatcher. Connecting the task executer to a control point should be all that's necessary. You might want to check if the AGV is blocked by the first one.

Hope this helps. If the problem persists it would be good if you could upload your current model state again. It's difficult to help based on a short description only.
0 Likes 0 ·
Farah_najihah A avatar image Farah_najihah A Felix Möhlmann commented ·

model agv error.fsm

Thank you for your patience explaining it to me. I have taken out the dispatcher and connect to the agv directly. I am sorry as I couldnt really execute well. I attached my model for your reference, if you could help where am I missing :(

0 Likes 0 ·
model-agv-error.fsm (14.2 MiB)
Show more comments

Write an Answer

Hint: Notify or tag a user in this post by typing @username.

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.