question

Gideon avatar image
0 Likes"
Gideon asked Gideon commented

How to Connect Elevator and Robot in Process Flow

1.fsm

Hi there,

How to connect elevator and robot for transferring the flow item to the multiprocessor? I wanted to get the flow item to be transported by the robot to the multiprocessor, after it has been elevated.

Besides, as seen from the picture attached, the flowitem is seen to be floating on the elevator. How to solve this?

Thank you

FlexSim 18.2.2
robotelevator
picture1.png (486.4 KiB)
1.fsm (39.6 KiB)
5 |100000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

1 Answer

gilbert jerald avatar image
0 Likes"
gilbert jerald answered Gideon commented

@Gideon

Hi,

As per your question I have altered your model in which item will be transferred by the robot to multiprocessors after it has been elevated.

Note: I have used a queue name called"First Floor" in the elevator travel path, The queue is kept at the height where the robot is placed and the queue is been hidden. This is done to see visually that the item is been transferred by the robot from the elevator to multiprocessor.

support-elevator-robot.fsm

Thanks


support-elevator-robot.fsm (40.1 KiB)
· 1
5 |100000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Gideon avatar image Gideon commented ·

Hi @gilbert jerald,

Thank you so much!

0 Likes 0 ·